Sending The Scanned Data By Fax - Fujitsu ScanSnap N1800 Operator's Manual

6.5

Sending the Scanned Data by Fax

1. On the [Main Menu] window, press the [Fax] button.
The [Send Fax] window appears.
2. Enter a fax number into the [Recipient Fax No.] field.
3. In the [Notification To (Sender's e-Mail Address)] field, enter an e-mail
address to which a notification of the results of the fax sending should
be sent.
For details about e-mail address settings values, refer to
Setting Values" (page
The scan information can be changed by pressing
details, refer to "6.9 Setting the Scan Options" (page
Fax numbers can be selected from the fax number list by pressing
For details, refer to "6.5.1 Selecting a Fax Number from the Fax Number List"
(page 325).
477).

6.5 Sending the Scanned Data by Fax

322
of [Scan Settings]. For
354).
.
"B.1 e-Mail Address