Using The On-Screen Keyboard; Showing/Hiding The On-Screen Keyboard - Fujitsu ScanSnap N1800 Operator's Manual

Network scanner

Hide thumbs Also See for ScanSnap N1800:

Table of Contents

Using the On-Screen Keyboard

On the LCD touch panel, the on-screen keyboard can be used to enter text in the input

field on the window.

The on-screen keyboard can be used in the following ways.

To show/hide the on-screen keyboard, press the following button displayed on the LCD

touch panel.

When you touch any input field, the on-screen keyboard is displayed. In the [Login]

window, the on-screen keyboard is automatically displayed.

For an Add-in, you can use the [Add-in Software] window to set the on-screen

keyboard not to be displayed when running an Add-in.

When you display the on-screen keyboard when running an Add-in, you can change

the display location of the button used for displaying the on-screen keyboard.

Press this button to show the on-screen keyboard.

The on-screen keyboard is displayed to enable entering characters.

This button is displayed while the on-screen keyboard is enabled.

Pressing this button hides the on-screen keyboard.

This button is displayed when there is no input field in the window.

In this state, the keyboard cannot be displayed.