Administrator Login: Via The Admin Tool - Fujitsu ScanSnap N1800 Operator's Manual

4.2.3 Administrator Login: via the Admin Tool

The Admin Tool can be set up to manage the scanner via a computer.
This section explains how to login using the Admin Tool.
If the normal screen display does not appear (for example: an "X" mark appears),
wait for a few minutes and try again. If the problem still occurs, contact your
FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
If a button is rapidly pressed many times in succession, a "Connection error"
message may appear. In this case, wait for a few minutes and try again.
For details about setting up to manage the scanner via a computer, refer to
Requirements for Admin Tool" (page
The default user name and password for the administrator are set as follows:
User name: admin
Password: password
The scanner setup can be configured by one user.
Session timeout time is 20 minutes (fixed). The session timeout time is extended by
a further 20 minutes for the following:
when a menu button is pressed
when the [OK] button is pressed
46).
84
4.2 Administrator Login
"1.4.1