Fujitsu ScanSnap N1800 Operator's Manual page 268

4. Configure job mode settings.
The contents of the last configured job mode settings are shown.
[Job Sequences] button
The setting items are the same as those set in the [Job Sequences] tab in the job
mode settings menu in the window for administrator operations. For details, refer
to "4.17.2 Setting a Job Sequence" (page
To set [Print] or [Save] for a job sequence, a network printer or network folder must
be previously added on the job mode edit window.
The job sequences and job mode edit window settings are related in the following
way.
The network printers shown on the [Printer List] window when [Print] is selected
as a job item, are the network printers set on the job mode edit window.
The network folders shown on the [Folder List] window when [Save] is selected
as a job item, are the network folders set on the job mode edit window.
[Job Menus] tab
The setting items are the same as those set in the [Job Menus] tab in the job mode
settings menu in the window for administrator operations. For details, refer to
"4.17.3 Setting a Job Menu" (page
[Job Groups] tab
The setting items are the same as those set in the [Job Groups] tab in the job
mode settings menu, in the window for administrator operations. For details, refer
to "4.17.4 Setting a Job Group" (page
[Close] button
Registers the entered job mode settings and returns to the [Job Mode Settings]
window.
5. In [Settings Release Schedule], set the schedule to release job mode
settings.
6. Press the [Register] button.
The entered job mode settings are registered.
198).
207).
213).
268
5.12 Setting the Job Mode