Blank - Fujitsu ScanSnap N1800 Operator's Manual

6.9.17 Blank Page Skip
The scan process can be set to skip any blank pages in the scanned data.
For example, when a stack of documents containing both two-sided and one-sided
documents is scanned in duplex scan mode, this feature removes only the reverse side
(i.e. blank page) of one-sided documents from the scanned data.
1. On the [Scan Settings] window, select the [Advanced] tab.
2. Press the [Blank Page Skip] button.
The [Blank Page Skip] window appears.
3. Select whether or not blank pages are to be skipped.
This returns you to the [Scan Settings] window. The selected setting is displayed
to the right of the [Blank Page Skip] button.
If the Brightness setting (see
[Medium Dark], blank pages may not be recognized as such by the scanner.
No scanned data is produced if all of the sheets in the document stack are
recognized as blank pages.
The following types of documents may be accidentally recognized as blank pages.
Before discarding the scanned documents, check for pages accidentally removed
from the scanned data. If any pages have been removed, the document may need
to be re-scanned.
Almost blank pages containing only a few characters
Page of only one color (including black), without any patterns, lines, or characters.
6.9 Setting the Scan Options
"6.9.12 Brightness" (page
386
381)) is set to [Dark] or