Fujitsu ScanSnap N1800 Operator's Manual page 406

Network scanner

Hide thumbs Also See for ScanSnap N1800:

Table of Contents

Operations vary according to whether the [Message Screen] is set to [On] or

If a job sequence is processed when [Message Screen] is set to [On], the

[Message Screen] will be shown.

After checking the message, press the [Scan] button to start the scan. If

any further job setup steps are required, press the [OK] button that

appears instead.

If a job sequence is processed when [Message Screen] is set to [Off], the

job will be processed without showing the [Message Screen].

6.14 Processing a Job

Troubleshooting