Calibrating The Lcd Touch Panel - Fujitsu ScanSnap N1800 Operator's Manual

Network scanner

Hide thumbs Also See for ScanSnap N1800:

Table of Contents

Calibrating the LCD Touch Panel

This should be done when the LCD touch panel responses seem out of alignment with the

positions of objects on the LCD screen.

1. On the [Admin Menu] window, select [Device Test]

Calibration].

The [Screen Calibration] window appears, with a red "+" (adjustment mark)

shown on it.

2. Touch the "+" with your fingertip.

Repeat until the test window appears, with the following [Calibration] dialog box:

3. Trace a line on the screen with your fingertip.

A line corresponding to how you move your fingertip appears on-screen.

If the screen becomes cluttered, press the [Calib Screen] button to remove all the

lines and repeat the process from

After being touched, the "+" will move to the next calibration position.

Each time it stops, touch it again.