Replacing Parts; Part Numbers And Replacement Cycle - Fujitsu ScanSnap N1800 Operator's Manual

Network scanner
Hide thumbs Also See for ScanSnap N1800:
Table of Contents

Advertisement

7.5

Replacing Parts

7.5.1 Part Numbers and Replacement Cycle

The following table specifies the replacement part numbers and the standard replacement
cycles.
PAD ASSY
PICK ROLLER
These replacement cycles are rough guidelines for when using 80 g/m
woodfree or wood containing paper. They may vary according to the type of documents
scanned, scanner usage, and cleaning frequency.
For more details about how to check the consumable alert status, refer to
the Consumable Alert Status" (page 422)
To obtain these parts, contact your FUJITSU dealer or an authorized FUJITSU scanner
service provider.
Part name
When the consumable alert status is orange or red, contact your scanner
administrator to replace the necessary part.
Use only the PFU LIMITED parts specified. Do not use consumable parts made by
other manufacturers.
Part No.
PA03586-0002
PA03586-0001
.
421
Replacement cycle
After every 50,000 sheets
scanned or once a year
After every 100,000 sheets
scanned or once a year
2
(20 lb) A4/Letter
"7.5.2 Checking

Advertisement

Table of Contents
loading

Table of Contents