Using The Scanner Buttons; Using The Power Button - Fujitsu ScanSnap N1800 Operator's Manual

2.2

Using the Scanner Buttons

■ Using the Power Button

When the scanner is off or in standby mode, pressing the power button will start the
scanner up and display the login window.
Shutdown
(*) Other than pressing the power button, any of the following operations will startup
the scanner from standby mode.
Loading the documents into the ADF paper chute.
Closing the top cover.
Pressing the power button.
Touching the LCD touch panel.
The window displayed after a re-startup varies according automatic login settings in the
following way:
If automatic login is enabled, the operation window is displayed.
If automatic login is disabled, the login window in displayed.
LED Dark
Press Button
When the scanner is starting up or in standby mode, be careful to never hold the
power button down for 4 seconds, as this will cause the scanner to shutdown. If this
happens, saved scanned data may become unusable.
If the power button is accidentally held down too long, causing the scanner to
shutdown, temporally detach the AC adaptor to ensure that the power is completely
off.
After turning the power off, wait for at least 10 seconds before turning the power
back on again. To shutdown the scanner correctly, press the [Shutdown] button on
the [Login] window.
Operating
LED Lit
Login Window
Login
Operation Windows
No operation
for set period
Standby
LED Lit
59
Press Button(*)