Using The Top Cover Scan Button - Fujitsu ScanSnap N1800 Operator's Manual

When the scanner is left in standby mode for a long period of time, it may take a
long time to be resumed.
The idle time before standby mode entered can be changed. For details, refer to
"4.7.2 Setting the Time to Standby Mode" (page
Automatic login without displaying the [Login] window is possible. For more details
about how to set automatic login, refer to
104).
If automatic login is set, login via the Admin Tool is possible while the main menu or
job menu is displayed.

■ Using the Top Cover SCAN Button

When a button with
becomes available.
When a button with
The LCD touch panel [Scan] button with
[Scan]
[Scan & Send]
[Scan & Print]
[Scan & Save]
[Scan More]
One of those buttons on the LCD touch panel can be pressed to start the scan.
is displayed on the LCD touch panel, the SCAN button
is displayed, the Scan button can be pressed to start the scan.
60
2.2 Using the Scanner Buttons
107).
"4.7.1 Setting the Login Settings" (page
may appear as follows: