Cannot Login; Operation Does Not Work - Fujitsu ScanSnap N1800 Operator's Manual

Scanned data is skewed.
■ Check item
Are the side guides aligned with the document width?
■ Action
Align the side guides with the paper size.
Pick roller may also cause this problem. Refer to "Check item" and "Action" for
into the scanner. (Pick errors are frequent or document feed stops midway)" (page 456)

■ Cannot Login

Cannot login with administrator password.
■ Check item
Was the Caps Lock on when the password was entered?
■ Action
Turn off the Caps Lock and try logging in again.
If the password has been lost or forgotten, contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider.
The [Login] window is not displayed when connecting via the network.
■ Check item
Are the SSL settings correct?
■ Action
Close the window, correct the settings, and try connecting again.
■ Check item
Was the [Yes] button selected on the [Security Warning] dialog box when
connecting with HTTPS?
■ Action
Close the window and try connecting again. Select the [Yes] button on the [Security Warning]
dialog box when connecting.

■ Operation Does Not Work

Input field entry entered via the on-screen keyboard does not appear on
the window.
■ Check item
Has the input field been selected?
■ Action
Select the input field and try again.
458
8.3 Other Troubleshooting
"Paper is not fed
.