Logging In: Regular User Mode - Fujitsu fi-6000NS Operator's Manual

4.3

Logging in: Regular User Mode

LDAP (Active Directory) is used to perform user authentication for the scanner login.
This allows either of the following two forms of login name to be specified in the user info.
The scanner follows the Active Directory user name format when authenticating the user login.
User Name
Contains a "@"
Does not contain a "@"
Note that the authenticated user info is also used when saving scans to a network folder.
•
HINT
•
1. Push the startup button.
⇒
The "Login" screen appears.
Active Directory user login name (userPrincipalName).
Windows® 2000 Server user login name (sAMAccountName).
When using the scanner without an LDAP server, enter the following user name
and password. For details about the LDAP server, refer to "1.5.2 LDAP Server"
(page 15).
User Name: guest
Password: guest
Only one administrator or user can login to the scanner at any one time.

4.3 Logging in: Regular User Mode

Authentication Target
Startup button
Network Scanner fi-6000NS Operator's Guide
4
139