Logging In: Regular User Mode - Fujitsu iScanner fi-6010N Operator's Manual

6.3

Logging in: Regular User Mode

AUTION
LDAP (Active Directory) is used to perform user authentication for the scanner login.
This allows either of the following two forms of login name to be specified in the user info.
The scanner follows the Active Directory user name format when authenticating the user login.
User Name
SAM Account Name
Does not contain a "@"
User Principal Name
Contains a "@"
Note that the authenticated user info is also used when saving scans to a network folder.
When the scanner is turned on or restarted, automatic login without displaying the "Login" screen
is possible.
Login is not possible if the Active Directory account option is "User must change password at next
logon". Contact an administrator to change a password, and then try logging in.
HINT
262
Do not move or shake the scanner when it is turned on.
This can damage the rotating hard disk drive and cause data to be lost.
Active Directory user login name (sAMAccountName).
(sAMAccountName authentication process is performed)
Example: user
Active Directory user login name (userPrincipalName).
(userPrincipalName authentication process)
Example: user@example.com
•
When using the scanner without an LDAP server, enter the following user name
and password. For details about the LDAP server, refer to
15).
User Name: guest
Password: guest
However this can not be used if login with the guest account is disabled.
•
For details about automatic login or enabling login with the guest account, refer
to "4.6.7 Setting the Login Method" (page
•
Only one administrator or user can login to the scanner at any one time.
Authentication Target
63).
"LDAP Server" (page