Logging In: Regular User Mode - Fujitsu fi-6010N Operator's Manual

6.3

Logging in: Regular User Mode

LDAP (Active Directory) is used to perform user authentication for the scanner login.
This allows either of the following two forms of login name to be specified in the user info.
The scanner follows the Active Directory user name format when authenticating the user login.
User Name
SAM Account Name
Does not contain a "@"
User Principal Name
Contains a "@"
Note that the authenticated user info is also used when saving scans to a network folder.
When the scanner is turned on or restarted, automatic login without displaying the "Login" screen
is possible.
•
HINT
•
•
1. Push the startup button.
⇒
The "Login" screen appears.
Active Directory user login name (sAMAccountName).
(sAMAccountName authentication process is performed)
Example : user
Active Directory user login name (userPrincipalName).
(userPrincipalName authentication process)
Example : user@example.com
When using the scanner without an LDAP server, enter the following user name
and password. For details about the LDAP server, refer to
15).
User Name: guest
Password: guest
However this can not be used if login with a guest account is disabled.
For details about automatic login or enabling login with a guest account, refer to
"4.5.7 Setting the Login Method" (page
Only one administrator or user can login to the scanner at any one time.

6.3 Logging in: Regular User Mode

Authentication Target
59).
Startup button
Network Scanner fi-6010N Operator's Guide
"LDAP Server" (page
231
6