Problems On Monitoring Tool - Printronix LP844C User Manual

Problems on Monitoring Tool

• If you cannot solve a problem with the following solutions, contact your dealer.
• For problems caused by an application, contact the manufacturer of the application.
• If firmware update has failed
Cause
The machine has failed to connect to Check the internet connection.
the server.
The entered administrator password Check the administrator password.
is incorrect.
The machine is turned off. Check that the machine is turned on,
then try firmware update again. If the
"Executing Maintenance" message is
displayed on the operator panel, wait
until the machine enters standby
status and try again.
The machine is not connected. Connect the machine.
The machine is currently in use. Update the firmware when the
machine is not in use.
An error has occurred in the machine Solve the error, then update the
(no toners, paper jams, etc.). firmware.
solution Reference
-
-
-
-
-
-
- 172 -
6. Utility Software