Space Motor Assembly - OKIDATA ML320 Service Manual

3.2.15 Space Motor Assembly

Perform these procedures first:
- 3.2.01 ( )
- 3.2.03 ( )
- 3.2.04 ( )
- 3.2.14 ( )
- Note the position of the connector (1). During assembly, the connector's orientation is
critical for correct printhead operation.
- Detach the connector.
- Remove the three mounting screws (2).
- Remove the space motor assembly (3). Be careful not to lose the slider (4).
NOTES:
Installation
Service Guide ML320/ML321
Chapter 3 Maintenance & Disassembly
Page: 62