Table of Contents
Advertisement
In addition, boards ordered with the ruggedized service comply with the following standards as well.
Table 3: Additional Standards for Boards Ordered with Ruggedized Service
T YPE
Environmental
Vibration
(Sinusoidal)
Single Shock
Note:
Customers desiring to perform further environmental testing of the CPS3003-SA must con-
tact Kontron for assistance prior to performing any such testing.
Boards without conformal coating must not be exposed to a change of temperature which
can lead to condensation. Condensation may cause irreversible damage, especially when
the board is powered up again.
Kontron does not accept any responsibility for damage to products resulting from destruc-
tive environmental testing.
1. 6 Re l a te d Pu b l i c a t i o n s
The following publications contain information relating to this product.
Table 4: Related Publications
PRODUCT
CompactPCI Serial Systems
CompactPCI Systems
CFast
Platform Firmware
All Kontron products
www.kontron.com
ASPECT
STANDARD
IEC60068-2-6
IEC61131-2
IEC60068-2-27
IEC61131-2
PICMG® CPCI-S.0 R 1.0 CompactPCI® Serial Specif ication
PICMG® 2.0, Rev. 3.0 CompactPCI® Specif ication
CFast Specif ication Revision 1.1
Unif ied Extensible Firmware Interface (uEFI) specif ication, version 2.3.1
Product Safety and Implementation Guide, ID 1021-9142
REMARKS
Ruggedized version test parameters:
9-150 (Hz) frequency range
1 (g) acceleration
1 (oct/min) sweep rate
10 cycles/axis
3 axis
Ruggedized version test parameters:
15 (g) acceleration
11 (ms) shock duration half sine
3 number of shocks per direction (total: 18)
6 directions
5 (s) recovery time
PUBLICATION
User Guide
CPS3003-SA
19
Advertisement
Table of Contents
