Copy The Recovery Files To The Pxe Folder - NCR 7448 Hardware User's Manual

5-34 Chapter 5: Crisis Recovery

Copy the Recovery files to the PXE folder

Copy the following three files to the PXE folder from a CD-ROM.
•
DISKINIT.BSD (PXE Boot Strap Program)
•
DISKINIT.BID (PXE Boot Image)
Depending on the Operating System you want to install, copy one of the
following files:
WindowsCE
•
NCR72WCE.GHO (WindowsCE 2.12 Flash Disk Image)
•
XXXXXXXX.GHO (WindowsCE 3.0 Flash Disk or Compact Flash disk
card Image)
DOS
•
NCRDOSM.GHO (MS-DOS Flash Disk Image)
•
XXXXXXXX.GHO (MS-DOS Hard Disk Image)
Note: XXXXXXXX= 8 digit number that changes with software upgrade
Windows98
•
YYYYYYYY.GHO(Windows98 Hard Disk Image)
Note: YYYYYYYY= 8 digit number that changes with software upgrade