NCR 7448 Hardware User's Manual page 188

5-36 Chapter 5: Crisis Recovery
4. Press the Enter key.
5. Select the Boot menu into the Phoenix BIOS Setup Utility. And pull down
the Hard Drive item.
Pheonix BIOS Setup Utility
Main Advanced
Diskette Drive
-Hard Drive
Boot Manager PXE
Key Assign
6. The crisis Recovery is done to the first hard drive. In case of the above
picutre, the crisis Recovery is done to "M-System DiskOnChip". If you
execue the Crisis Recovery with the different hard drive, you can change
the boot ordr by using Up, Down, plusz(+) or Minus(-) key.
Note:
When you can set the "plus" key on the 80 key keyboard, you can
1) Press and hold down Alt key.
2) Press the "4" and "3" keys sequencially on the NUM PAD.
3) Release the Alt key.
Security Power
M-system DiskOnChip
SanDisk SDCFB-48-(PM)
Bootable Add-in Cards
Boot Exit
Item Specific Help