Ncr 7448 Network Boot Setting - NCR 7448 Hardware User's Manual

A-14 Appendix A: BIOS

NCR 7448 Network Boot Setting

See Keys Used in the Crisis Recovery, BIOS Setup, and BIOS Upgrade in
Appendix A: BIOS.
Turn on the NCR 7448 Workstation power. The workstation displays the NCR
logo.
Caution: Power up the workstations at an interval of at least 5 seconds if you are
going to turn on more than one workstation.
Press ESC key when the boot manager displays the followings:
PXE-M00: BootManage UNDI, PXE-2.0 (build XXX)
PXE-M00: Initializing: PnP/BEV
PXE-M04: Hold down both shift keys to change bootstrap
selection...
In the boot menu below, select 3. BootManage UNDI, PXE-2.0 (build XXX) by
using the down arrow key.
1. Diskette Drive
2. +Hard Drive
3. BootManage UNDI, PXE-2.0 (build XXX)
<Enter Setup>
Press the Enter key.
Press any key to continue when the workstation requests you to do so.
Boot Menu