How To Install The Server Lock - NCR 7448 Hardware User's Manual

3-10 Chapter 3: Installing Optional Hardware Features

How to Install the Server Lock

1. Remove the Lower Cabinet.
See Removing the Lower Cabinet in Chapter 2 of the NCR 7448 Hardware
Service Guide.
2. Disconnect the Keyboard cable from the cable connector on the
workstation.
3. Take out the Keyboard.
See Removing the Keyboard/ 176 Key Keyboard in Chapter 2 of the NCR
7448 Hardware Service Guide.
4. Remove the knockout with a screw driver.
5. Insert the cable of the Server Lock and fix the cable by holding with the
stopper.