5.
Select "0" to load the default CE Ghost image (Go Installation) or you can
change ghost settings parameters to match your network environment. (If
you are just loading the factory CE Disk image, most users will not need to
change parameters and can just select "0.")
The confirmation message "Press any key to con" will be displayed in
about twenty five seconds.
6.
Press any key.
Writing to the Flash Disk starts. "Installation Complete! Turn off the
system" will be displayed in about twenty five seconds.
Installation
Complete !
Network Parameters
Turn off the system.
7.
Turn off the 7448 Workstation.
Chapter 5: Crisis Recovery 5-43