Out-Of-Box Hardware Installation - NCR 7448 Hardware User's Manual

2-2 Chapter 2: Workstation Hardware Installation

Out-of-Box Hardware Installation

The NCR 7448 Workstation is fully assembled at the factory. To install the
hardware, all that is necessary is to place the workstation in the desired location
and connect the external cables.
1. Unpack the workstation.
2. Place the workstation in the desired location.
3. Lay the workstation on its side to gain access to the cable connectors.
4. Connect the external cables. Use the following illustrations as a reference
to locate the proper cable connectors.