NCR 7448 Hardware User's Manual page 84

4-12 Chapter 4: Setup
System Setting Report (Windows CE 2.12/ CE 3.0)
Report - 10/20/2002 09:00:00
Peripherals:
COM1: NCR 2x20 Operator
19200, 8, None, 1, RTS/CTS
Power: Enable
COM2: None
COM3: None
COM4: NCR 7197 Printer
115200, 8, None, 1, None
Power: Disable
COM5: None
COM6: None
Time Zone:
(GMT – 05:00) Eastern Time (US & Canada)
Network:
Terminal Name: NCR7448
Adapter: NSC DP83815 MacPhyter Adapter
Domain:
DHCP: Disable
IP Address: 192.168.0.1
Subnet Mask: 255.255.255.0
Gateway: 0.0.0.0
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
Primary WINS: 0.0.0.0
Secondary WINS: 0.0.0.0
Configuration:
000-Enable: Configure Windows CE
500-Enable: Configure 7448 Platform
Software
Boot Disk: \FlashDisk,
RAM: 64MB
Model: 7448-2100-8001
Serial: 49-12345678
BIOS: 4.06, 10/15/2002
NCR 7448 Windows CE Platform:
D570-0725-0000 V1.04.00
Operating System:
Microsoft Windows CE V2.12.00
Note: To print the Model Name and Serial Number, the following system should be met'
NCR Windows CE 2.12 Platform (D570-0725-0000) Version 1.04.00 or later.
NCR Windows CE 3.0 Platform (D570-0754-0000) Version 1.04.00 or later.
48MB (approx.)