Troubleshooting; User Diagnostics; Copy Diagnostics - NCR PC4i Owner's Manual

USER DIAGNOSTICS

Let's review the use and function of the User Diagnostics on the
diskette packaged with this manual. You can use these Diagnostics
either to identify hardware problems you encounter with your
computer or to prepare your computer for a move.
You are presented with optional test selections, status and error
conditions, test patterns on your display, and diskette copy instruc­
tions for this diskette.

Copy Diagnostics

You can use your NCR-DOS program to copy the DIAGNOSTICS
program to another flexible diskette.
a. Insert your DOS diskette into drive A.
b. Turn ON your power switch.
c. Insert a blank diskette in drive B. (It need not be formatted.)
d. When the A > appears on the screen, type DISKCOPY A:B:
and press the ENTER key.
e. The system reads from the DOS diskette the information it
requires to perform the function you have asked of it. A
prompt message appears on the screen:
Insert source diskette in drive A:
Insert destination diskette in drive B:
Press any key when ready.
f. Follow the instructions given on the display. Remove the DOS
diskette and insert the DIAGNOSTICS diskette. Press any
key when ready. When the system has finished the task, a
message appears on the screen to that effect. Remove the
diskettes. You now have a copy of your diagnostics diskette.
Put your master copy back in the protective envelope and
store it in a static-free place, or insert it in the pocket at the
back of this manual.
You can use.your NCR-DOS program to copy your DIAGNOSTICS
program to your fixed disk:
OWNER S MANUAL
MAINTENANCE AND TROUBLESHOOTING

TROUBLESHOOTING

4-7