Install "Ncr Pxe Staging And Crisis Recovery Server Services" (Version 1.1) - NCR 7448 Hardware User's Manual

5-4 Chapter 5: Crisis Recovery
Install "NCR PXE Staging and Crisis Recovery Server Services"
(Version 1.1)
Caution: The server PC must have the account that belongs to Administrator
Group.
Note: If "NCR PXE Staging and Crisis Recovery Server Services" is already
installed (with NCR DHCP Server) on the Server PC it is not neccesary to
install the software.
However, if "NCR PXE Staging and Crisis Recovery Server Services" is
installed without NCR DHCP Server it is necessary to uninstall the software and
re-install it by performing the following procedure.
Install "NCR PXE Staging and Crisis Recovery Server Services"
The first step is to install "NCR PXE Staging and Crisis Recovery Server
Services" onto the server PC.
Insert "NCR PXE Staging and Crisis Recovery Server Services" CD-ROM into
the server PC. Assume the CD-ROM drive is "D:"
Find "D:\NCR PXE Staging and Crisis Recovery Server Software.exe" using
Explorer and run it, which will display this window message.