How To Install Cash Drawer - NCR 7448 Hardware User's Manual

Chapter 2: Workstation Hardware Installation 2-3

How to Install Cash Drawer

The Cash Drawer cable connector is located on the Rear Panel of the NCR 7448
Workstation. Integrated cash drawers are pre-installed at the factory. If your
system configuration has a remote cash drawer you need to connect the cable to
the workstation. If your system configuration has dual drawers you need to
connect the Y-cable to the workstation.
Cash
DWR. #1
497-0409394
Cash
DWR. #2
1. Locate the cash drawer connector and install the cable.
If you have additional hardware features to install see the Installing Optional
Hardware Features in Chapter 3.