How To Install The Pcmcia Expansion Board - NCR 7448 Hardware User's Manual

3-12 Chapter 3: Installing Optional Hardware Features

How to Install the PCMCIA Expansion Board

1. Remove the Lower Cabinet.
See Removing the Lower Cabinet in Chapter 2 of the NCR 7448 Hardware
Service Guide.
2. Install the PCMCIA Expansion Board over the Main processor Board.
Confirm the board connection (J18) to the Main Processor Board.
3. Fix the Board with three screws on the Main Processor Board.
Install a PCMCIA card into the board from the windows of the chassis.