Table of Contents
Advertisement
4.
Enter the PASSWORD and press the ENTER key or P1 key. Or, Turn key
to the 'EX' position if your 7448 Workstation has keylock.
Note: This step is omitted when the key is already set to the
'EX' position.
5.
Press 1 to start the COIN DISPENSER test
6.
Enter the change amount to be discharged and press the ENTER key or P1
key
The NCR 7448 Workstation displays either PASS or FAIL
7.
Press 0 to stop the test
The NCR 7448 Workstation exits the COIN DISPENSER test and returns
to OTHERS Menu.
Chapter 4: Setup 4-47
Hide quick links:
Advertisement
Table of Contents
