13
Chapter 13:
Introduction
Prerequisites
OS Recovery Procedures
Operating System Recovery
This chapter discusses procedures on how to recover the Operating System from
CD‐ROM. If your unit does not have an internal CD‐ROM drive you can use one of
the following:
•
Teac USB External CD‐ROM Drive (2336‐K208)
•
NCR Services: External CDR/W DVD‐ROM Drive (603‐9014774)
•
Network (See the NCR FitClient Software Userʹs Guide, B005‐0000‐1235.)
The following are required in order to perform an OS recovery from a CD.
•
Bootable CD‐ROM drive (internal or external)
•
Keyboard
1. Insert the NCR Partition Image Application CD (D370‐0605‐0100) into the CD drive.
2. Connect a keyboard to the terminal.
3. Apply power to the terminal.
4. Press [F8] during boot (when you see the NCR logo) to enter the Boot Select
menu.
5. If you are using the integrated CD/DVD Drive select CD/DVD:P1-DV-28S-V.
If you are using the external USB CD Drive select USB:TEAC
6. You should see a message during boot, indicating that the CD‐ROM has been
recognized.
CD-W552E.