Table of Contents
Advertisement
Inserting AMC Module Into AMC Connector
FIGURE 2-10
AMC module
(AMC disk drive shown)
6. Carefully plug the AMC module into the AMC connector (
Ensure that the AMC module is seated correctly in the connector.
Caution – Do not use excessive force when installing the AMC module into the slot.
You might damage the AMC connector on the Sun Netra CP3060 blade server,
causing permanent damage to the AMC module or the blade server. If the AMC
module does not seat properly when you apply even pressure, remove the AMC
module and carefully reinstall it.
7. Refer to the AMC module documentation for software and cabling installation
instructions.
FIGURE 2-10
Chapter 2
Hardware Installation
).
2-19
Advertisement
Table of Contents
