Hardware Requirements; Software Requirements - Sun Microsystems Netra CP3060 User Manual

1.5.1

Hardware Requirements

Sun provides the following items for customer order:
Sun Netra CP3060 node blade server
■
Sun Netra CP3060 RTM (optional)
■
The RTM enables rear system I/O access to the network, to a boot device, and to
a console terminal (shown in
Transition Module User's Guide (819-6689) for more information.
The Sun Netra CP3060 RTM is optional and must be ordered separately.
Compact Flash card (optional)
■
An IDE Compact Flash card is optional and must be ordered separately.
Acquire the following components, if needed:
Serial terminal or terminal emulation for console output.
■
Cables for terminal and network connections.
■
The Sun Netra CP3060 RTM and the AMC disks and PCI-E cards are optional.
■
TABLE 1-3
blade server.
TABLE 1-3
Requirements
ATCA system enclosure for 8U boards (includes chassis,
midplane, power supply)
Console output device or serial terminal
Boot device (such as hard drive, network, or Compact Flash card)
Peripheral device for network access
Intelligent Platform Management Controller (IPMC)
1.5.2

Software Requirements

The Sun Netra CP3060 blade server supports the following versions of the Solaris
OS:
Solaris 10 OS and subsequent compatible versions
■
1-12 Netra CP3060 Board User's Guide • April 2009
lists ATCA and other minimum requirements met by the Sun Netra CP3060
ATCA and Other Minimum Requirements Met By the Sun Netra CP3060
Blade Server
). Refer to the Sun Netra CP3060 Rear
FIGURE 1-4
Sun Netra CP3060 Node
Blade Server
Yes
Yes
Yes
Yes
Yes