Table of Contents
Advertisement
You must type your superuser password again after typing this command. The
installation process should take roughly 5 minutes per client and about 15-30
minutes for the operating environment service to install; however, no progress is
displayed on screen while the process is running. Do not cancel or kill the process
until the process has successfully completed.
You should see messages similar to the following after a few moments,
confirming that the command went through successfully the second time:
TABLE 7
Login to client_host as user root was successful.
Download of com.sun.admin.osservermgr.cli.OsServerMgrCli from client_host was
successful.
6. Boot the diskless client.
3.5
Downloading and Installing SunVTS
Software
SunVTS™ software is a comprehensive suite that tests and validates the Sun Netra
CP3060 blade server by verifying the configuration and function of most hardware
controllers and devices on the blade server. SunVTS software is used to validate a
system during development, production, inspection, troubleshooting, periodic
maintenance, and system or subsystem stressing. SunVTS software can be tailored to
run on machines ranging from desktops to servers with modifiable test instances
and processor affinity features.
You can perform high-level system testing by using the appropriate version of
SunVTS software. For detailed information on SunVTS support and downloads,
refer to the following web site:
http://www.sun.com/oem/products/vts/
Ensure that the SunVTS software version is compatible with the Solaris OS version
being used. Information on the version of the SunVTS software installed can be
found in the file:
/opt/SUNWvts/bin/.version
For the latest version of SunVTS document, go to:
http://www.sun.com/documentation
Chapter 3
Software Installation
3-7
Advertisement
Table of Contents
