Configuring Rear Transition Module Hardware; Transition Module; Figure 2-4 Compact Flash Card Connector - Sun Microsystems Netra CP3060 User Manual

To install the Compact Flash card, use the arrow on the card's label as a guide and
insert the card into the Compact Flash connector (see
FIGURE 2-4
2.4.3

Configuring Rear Transition Module Hardware

If you are using the Sun Netra CP3060 RTM, refer to the Sun Netra CP3060 Rear
Transition Module User's Guide (819-6689). You can also refer to the Sun Netra CP3060
RTM manual for detailed connector pin assignments.
2-10 Netra CP3060 Board User's Guide • April 2009
Compact Flash Card Connector
).
FIGURE 2-4
Compact Flash connector