Tod Clock Battery Holder - Sun Microsystems Netra CP3060 User Manual

Blade server
Table of Contents

Advertisement

A.4.7

TOD Clock Battery Holder

The TOD clock battery holder is located under the AMC enclosure (see
The TOD battery must be type CR 1225, with a minimum of 4ma abnormal charging
current rating (for example; a Panasonic CR 1225).
Caution – Risk of explosion if battery is replaced by an incorrect type.
Dispose of batteries properly in accordance with manufacturer's instructions and
local regulations.
To install the battery, slide the battery into the holder with the side labeled "+ "
facing up.
A-14
Netra CP3060 Board User's Guide • April 2009
).
FIGURE A-1

Advertisement

Table of Contents
loading

Table of Contents