Hot-Swap Led; Figure 4-1 Hot-Swap Latch And Hot-Swap Led - Sun Microsystems Netra CP3060 User Manual

4.6.1.1

Hot-Swap LED

The blue Hot-Swap LED, located on the front panel of the Sun Netra CP3060 blade
server (
blade server is ready to be removed from the system.
Unlatching the bottom latch on the Sun Netra CP3060 blade server initiates the
hot-swap sequence. The LED lights steadily when the blade server can be safely
removed from the system. The reverse is true when a Sun Netra CP3060 blade server
is installed into the system. Once the Sun Netra CP3060 blade server is installed into
the system and the bottom latch is latched, the blue Hot-Swap LED blinks until the
blade server is ready and then turns off. The green LED lights steadily when the
blade server is ready.
FIGURE 4-1
FIGURE 4-1
Hot-Swap LED
(blue)
Hot-swap latch
(bottom latch)
4-16 Netra CP3060 Board User's Guide • April 2009
), blinks when a hot-swap is initiated, and lights steadily when the
FIGURE 1-1
shows the hot-swap latch and Hot-Swap LED.
Hot-Swap Latch and
Hot-Swap
LED