Installing An Optional Amc Module; Figure 2-9 Removing Amc Slot Filler Panel - Sun Microsystems Netra CP3060 User Manual

2.7.0.1

Installing an Optional AMC Module

Note – The following procedure provides a general set of instructions for installing
AMC modules on the Sun Netra CP3060 blade server. Refer to the AMC module
manufacturer's documentation for specific instructions on installing these devices.
1. Retrieve the wrist strap from the adapter's shipping kit.
2. Attach the adhesive copper strip of the antistatic wrist strap to the metal
chassis. Wrap the other end twice around your wrist, with the adhesive side
against your skin.
3. Remove the AMC slot filler panel from the blade server's front panel.
(
FIGURE 2-9
FIGURE 2-9
4. Retrieve the AMC module from its shipping kit and place it on an antistatic
surface.
5. Insert the AMC module through the cutout and into the AMC slot (
2-18 Netra CP3060 Board User's Guide • April 2009
).
Removing AMC Slot Filler Panel
AMC slot filler panel
).
FIGURE 2-10