FIGURE 2-5
Netra CP3060 blade server
(installed from front)
2.5.1.1
Installing a Rear Transition Module
1. Verify that you have taken the necessary antistatic precautions.
2. Go to the rear of the system and choose an appropriate slot for the RTM.
RTMs must be installed inline behind the accompanying node blade server. For
example, if the accompanying node blade server is installed in slot 3, its RTM
must be installed at the back of the system in slot 3. See
2-12
Netra CP3060 Board User's Guide • April 2009
Sun Netra CP3060
Installing the
Zone 3
connectors
Rear Transition Module
ATCA chassis midplane
FIGURE 2-5
Netra CP3060 RTM
(installed from rear)
.