ESI 50L User Manual page 38

ESI Feature Phone operation
Fixed-feature keys
The fixed-feature keys on the phone are permanently labeled as to their usage. The FLASH/RDL and
MUTE/DND keys both have dual purposes; your ESI system will govern this by permitting only the
appropriate function when either is pressed, depending on the circumstances at that moment. The different
phone models have some different fixed-feature keys.
Note: The fixed keys on the 48- and 24-Key Feature Phone vary from those on the 12-Key Feature Phone.
The 12-Key Feature Phone's programmable feature keys can be set for certain optional features
(described on page F.14) that come as fixed-feature keys on the 48- and 24-Key Feature Phones.
Keys' LEDs (lamps)
The LEDs (light-emitting diodes), or lamps, associated with the programmable and fixed keys aid in
determining the status of their function. In general:
•
Green indicates a function associated with your phone.
•
Red indicates an occurrence at another station.
•
A solidly lit lamp indicates in-use status.
•
Blinking indicates an action, such as ringing or holding, is required; a fast blink calls for
immediate action.
As an example, a blinking red key is a call ringing at another station; blinking green signifies ringing at your
station. (See also "Line keys," page F.13.)
Note: Each ESI Cordless Handset has only red LEDs, and only on its four programmable feature keys.
The illumination activity (such as blinking) otherwise is similar to that described above.
SPEAKER key and speakerphone operation
Note: The ESI Cordless Handset models and 12-Key Feature Phone each lack a speakerphone.
For hands-free conversation, use the SPEAKER key. When an outside call rings, you can press SPEAKER
to connect to the caller via your phone's built-in speakerphone. This lights the SPEAKER key's LED. Or,
while using the handset, you can switch a call to the speakerphone by pressing SPEAKER and hanging up
the handset. (To revert to the handset from speakerphone mode, lift the handset again.) To perform group
listening — i.e., have a handset conversation along with the caller's voice broadcast over your speaker —
press SPEAKER while on a handset conversation but do not hang up the handset.
Hands-free answer (internal calls only)
Note: To use this feature on an ESI Cordless Handset, you must be using a headset.
You can program your phone to enable or disable hands-free answer
hands-free enabled, an internal call to your station generates a short ring and a double connect tone, then
automatically connects the caller to your speakerphone. With hands-free disabled, an internal call to your
station generates a single-ring cadence; outside calls ring with a double-ring cadence.
Note: The 12-Key Digital Feature Phone only supports hands-free listening. You must pick up the handset
to respond to the caller.
1
The 12-Key Feature Phone supports only hands-free listening. To answer, you must pick up the handset.
E.2
1
1
— press PROGRAM 3 5. With
User's Guide