ESI 50L User Manual page 78

Analog stations
Functions available during analog station voice mail message retrieval
Note: Functions tinted gray, below, either change or are not available when you're using an ESI Feature
Phone (see page D.4).
Key Function
1 Pause
2 Hear time/date
4 Back up (rewind)
5 Access user programming
6 Move
7 Delete
8 Main greeting
9 Save
9 9 Save as new
0 Operator
# Leave a message
To disconnect
Retrieving messages from another user's ESI Feature Phone
Press VOICE MAIL
page G.5).
G.6
Description
Pauses for one minute or until 1 is pressed again.
Pauses the message, plays the time/date of when the message was
left and resumes.
When pressed during message playback, rewinds 4 seconds for each
key press. If pressed after the message has finished, it returns you to
the beginning of the message.
Accesses user programming menu.
Moves a copy of the message to another User's mailbox.
To move the message without an introduction, press 6 when prompted.
To add an introduction, press 1 when prompted. When you've finished
your recording, press 1 to stop; You will be returned to the original
message in your mailbox.
Deletes the message from the mailbox (see "Message Recycle Bin,"
page D.8).
Goes to the main greeting (if your system is using the built-in auto
attendant).
Saves the message (it will be played as an old message the next time
messages are picked up).
Saves the message as new.
Transfers you to the operator.
Lets you record a message in one or more mailboxes. At the prompt,
enter the desired mailbox number. Press # and then enter up to 65
mailbox numbers, using the phone's dialpad. Mailboxes in a
department count toward the maximum of 65.
Always press
playback saves the message and any other unsaved messages).
and dial your extension number. Follow the procedures described previously (see
before hanging up (pressing it during message
User's Guide