ESI 50L User Manual page 60

Special keys
Using Esi-Dex: An example
Let's say you're on a call with the XYZ Company — XYZ COMPANY appears on your display — and you
wish to save the name and number for future use. Just press ESI-DEX. Your display will confirm that the
information has been stored.
for each model of ESI Feature Phone.
. . . On the 24-Key Feature Phone
1. Press ESI-DEX until you see PERSONAL DEX on the display.
2. Press 9 (W X Y). The display will show the first stored name that starts with W, X or Y.
3. Continue to press 9 until XYZ COMPANY appears in the display.
4. Press ESI-DEX again. This dials the number for the XYZ Company.
Important: The number dialed (if stored from a Caller ID) will be the number for the actual line used by
. . . On the 48-Key Feature Phone
1. While your station is idle (or just after receiving dial tone), press ESI-DEX.
2. Press PER to select the Personal Dex.
(Continued)
1
If the number is already in your Personal Dex, the message ALREADY STORED will appear on the display. This indicates Esi-Dex has prevented
storing the same number multiple times.
F.8
1
Then, to call the XYZ Company in the future, use Esi-Dex as described below
the caller, and may be different than the caller's listed number. Additionally, some local calls
may not be auto-dialed correctly, depending on the limitations of your area's local dialing
plan. You may wish to create a manual listing for these. Consult your administrator if you
need more help.
User's Guide