Special Keys - ESI 50L User Manual

Feature phone for the esi-50l communications server
Hide thumbs Also See for 50L:
Table of Contents

Advertisement

User's Guide

Special keys

FLASH
The FLASH key serves several purposes:
• Getting a fresh dial tone without replacing the handset — When connected to an outside line, press FLASH
to automatically disconnect and receive fresh outside dial tone. (See also "RELEASE," below.)
• Sending a flash hook signal — If operating behind Centrex
hook signal automatically to either the phone company's central office or the host PBX. Either may use this
signal to provide you with additional features.
• Toggling between calls — If you hear a call waiting tone while on a call, press FLASH to toggle between
the two calls.
REDIAL
Note: If using an ESI Cordless Handset, you must assign this function to a programmable feature key (see
"Optional features," page F.14).
The REDIAL key allows you to automatically call a stored name and number as shown below:
To . . .
Redial the last number called
Automatically respond to a message
RELEASE
The RELEASE key serves several purposes:
• If pressed when connected to a call through the handset, it disconnects the call and gives you internal dial tone.
• If pressed when you're connected to a call via the speakerphone, it disconnects the call.
• If pressed during call waiting, it drops the current call and automatically connects to the waiting call.
Notes: The hookswitch also acts as a combination FLASH/RELEASE key (and is the only way to perform these
functions on a 12-Key Feature Phone, which has neither a FLASH key nor a RELEASE key).
To send a flash hook signal, quickly press the hookswitch once.
To release (disconnect), hold down the hookswitch for one second.
To hang up when using an ESI Cordless Handset, press TALK or put the handset in its charging cradle.
1
A special service your phone company may offer. See your administrator for further details.
1
or a PBX, press FLASH to transmit a flash
Press REDIAL . . .
When your station is idle
. . . or . . .
After first lifting the handset or pressing SPEAKER
During message playback with Caller ID
Special keys
F.1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Esi-50l

Table of Contents