ESI 50L User Manual page 67

User's Guide
Manual day/night mode (Code 560)
You can use a programmable feature key to manually change the system's main auto-attendant greeting,
incoming call destinations, and CO line group access.
among: DAY, NGT, DAY2, NGT2, HDAY (holiday) or AUTO.
Tip: To keep the system from being taken out of this mode, place it in auto and then delete the
programmable feature key's programming.
Notes: The System Administrator can also change the mode and/or re-record the holiday greeting remotely to
handle unexpected closings, such as for inclement weather.
Service observing (Code 561)
Your administrator may assign service observing capability to those users who need to monitor others' calls
silently (e.g., in order to aid in quality assurance of call activity). To begin service observing, press the
assigned programmable feature key, followed by an extension number or station key. To discontinue
observing, press the station key again or hang up. As you observe another station's incoming call, your display
shows to whom that station is connected and how long the call has lasted.
Note: The Administrator must authorize service observing for your station, and the Installer must program the
list of allowed extensions.
Headset key (Code 564)
Note: It's unnecessary to program this key on an ESI Cordless Handset; one simply plugs in or unplugs a
headset as desired.
This key provides for easy connecting to/disconnecting from calls when operating in headset mode (see
"Headset operation," page F.10). Press the key to receive dial tone or to answer a ringing call. Press the key
again or press RELEASE to disconnect from the call.
Call-forward key (Code 565 or 565XXX)
Note: The 48-Key Feature Phone has a dedicated call-forward key (CFWD).
If you frequently call-forward your phone (see "Call forwarding," page E.9), you can program a programmable
feature key as a call forwarding key to automatically turn forwarding on and off. If you always forward to the
same extension, you can program a key with both 5 6 5 and the extension number.
Redial (Code 566)
This redials the outbound number (i.e., not internal extension) most recently dialed from your station.
Call-forward/no-answer key (Code 567)
Note: Not available on an ESI Cordless handset.
Enables or disables the call-forwarding/no-answer feature. When this feature is enabled and someone calls
your station but receives no answer, the call will go to the destination you've programmed (for more details,
see page E.9). The difference between this feature (Code 567) and traditional call forwarding (Code 565) is
that, with this feature, your phone actually rings first before going to the selected destination.
1
Depending on how the Installer has programmed your system, day and night mode for incoming calls and CO line group access may not change
upon use of this key.
2
AUTO indicates that the system will follow the day/night mode tables programmed by the Installer.
1
Each time the key is pressed, the display switches
2
Special keys
F.15