ESI 50L User Manual page 68

Special keys
Message monitor key (Code 568)
Easily toggle the message monitor mode on or off with this key. (Otherwise, you can perform the toggle by
pressing PROGRAM 3 6 and following the prompts.)
Background announce key (Code 569)
During call waiting, you can also make a brief, private background announcement (see "Background
announce feature," page E.11) to the station's earpiece (if the station user has enabled this feature). Hold
down the key until you hear a beep, then begin talking; release the key when finished.
Personal greeting keys (Codes 571–573)
These keys will provide for easy activation of one or more of your personal greetings (see "Personal
greetings," page D.1). The key's LED will be green for the associated personal greeting that is active. These
keys can be used in place of or in conjunction with manual activation of the greetings in programming mode.
Caller ID key (Code 574)
Notes: Not available on an ESI Cordless Handset.
This works only if you are receiving Caller ID service from your provider. Consult your Administrator,
if needed.
Press this programmable feature key to see the stored Caller ID records for your extension's 25 most recently
received calls. Use the scroll keys (
Caller ID records for only extensions which have a Caller ID key assigned; so, when you first assign the key,
you'll have no previous records through which to scroll.)
Note: The Caller ID key will light only when there's a missed call. Although voice mail messages' Caller ID
information also is stored by the system, waiting voice mail lights only the VOICE MAIL key.
The phone display will also indicate each call's classification as shown in this chart; also, if this is the first time
you're seeing this particular call's record,
Classification
Answered by the station
Missed call (abandoned call)
Went to your voice mailbox
Answered by "other" means (call-forwarding, use of
someone else's PICKUP key, etc.)
New record
While a record is on the display, you may do the following:
•
To dial the caller displayed, press REDIAL.
•
To view the telephone number (rather than the name), press 2.
•
To delete a record, press 7 while the record is on the display.
•
To store the record in your Personal Dex, press ESI-DEX.
To finish, press the Caller ID key again (or press RELEASE).
1
Not applicable to a 48-Key Feature Phone, which shows both the number and (if included in the Caller ID record) the name.
F.16
) to view Caller ID information from different calls. (The system stores
/
appears to the left of this indication.
On 48-Key Phone, On 24-Key Phone,
third line second line
ANS
MISS
VM
RE
1
User's Guide
A
M
V
R