Removing And Replacing The Top Cover; Figure 4-1 Removing The Front Bezel - HP AlphaServer TS15 Owner's Manual

4.2

Removing and Replacing the Top Cover

You must remove the enclosure from its rack in order to remove the top cover. With
the top cover removed, you have access to virtually all the internal components.
Removing Cables and Front Bezel
1. Shut down the operating system, turn off system power by pressing the power switch on
the operator control panel, and attach your antistatic wrist strap.
2. Go to the rear of the cabinet, locate the back panel of the AlphaServer TS15 enclosure,
and disconnect both power connectors. Also, disconnect the ground cable and all other
cables from the enclosure.
3. As show in the next figure, loosen the thumbscrews
the four screws
Remove the bezel and set it aside.
Figure 4–1 Removing the Front Bezel
3
2
1
that fasten the front bezel
1
to open the front door. Remove
to the enclosure's face panel
4
2
Installing and Configuring Options
.
MR0564
4-3