2.7.2
Manually Updating TIG or RMC Booter
If the TIG or RMC booter needs to be updated, you can perform a manual update.
1. Boot the update medium.
2. At the UPD> prompt, enter the exit command and answer y at the prompt:
***** Loadable Firmware Update Utility *****
-------------------------------------------------------------------
Function
Description
-------------------------------------------------------------------
Display
Displays the system's configuration table.
Exit
Done exit LFU (reset).
List
Lists the device, revision, firmware name, and update
revision.
Update
Replaces current firmware with loadable data image.
Verify
Compares loadable and hardware images.
? or Help
Scrolls this function table.
-------------------------------------------------------------------
UPD> exit
Do you want to do a manual update? [y/(n)] y
***** Loadable Firmware Update Utility *****
-------------------------------------------------------------------
Function
Description
-------------------------------------------------------------------
Display
Displays the system's configuration table.
Exit
Done exit LFU (reset).
List
Lists the device, revision, firmware name, and update
revision.
Update
Replaces current firmware with loadable data image.
Verify
Compares loadable and hardware images.
? or Help
Scrolls this function table.
-------------------------------------------------------------------
UPD>
Operating the System
(Continued)
2-25