Updating From The Cd-Rom - HP AlphaServer TS15 Owner's Manual

3. To update the TIG enter update tig For example:
UPD> update tig
Confirm update on:
tig
WARNING: updates may take several minutes to complete for each
device.
tig
UPD>
2.7.3

Updating from the CD-ROM

You can update the system firmware from CD-ROM.
1. At the SRM console prompt, enter the show device command to determine the drive
name of the CD-ROM drive.
2. Load the Alpha Systems Firmware Update CD into the drive.
3. Boot the system from the CD, using the drive name determined in step 1 (for example,
dqa0).
>>> boot dqa0
4. Enter the update command at the UPD> prompt.
5. When the update is complete, exit from the Firmware Update Utility.
UPD> exit
2-26 hp AlphaServer TS15 Owner's Guide
[Y/(N)]y
DO NOT ABORT!
Updating to 1.11... Verifying 1.11... PASSED.