Table 5-3 Special Characters For Srm Console - HP AlphaServer TS15 Owner's Manual

Table 5–3 Special Characters for SRM Console
Character
Return or Enter
Backslash (\)
Delete
Ctrl/A
Ctrl/B or
up-arrow
Ctrl/C
Left-arrow
Ctrl/E
Ctrl/F or
right-arrow
Ctrl/H
Backspace
Ctrl/J
Ctrl/O
5-6 hp AlphaServer TS15 Owner's Guide
Function
Terminates a command line. No action is taken on a command until
it is terminated. If no characters are entered and this key is pressed,
the console just redisplays the prompt.
Continues a command on the next line. Must be the last character
on the line to be continued.
Deletes the previous character.
Toggles between insert and overstrike modes. The default is insert
mode.
Recalls previous command or commands. The last 16 commands
are stored in the recall buffer.
Terminates the process that is running. Clears Ctrl/S; resumes
output suspended by Ctrl/O. When entered as part of a command
line, deletes the current line. Ctrl/C has no effect as part of a binary
data stream.
Moves the cursor left one position.
Moves the cursor to the end of the line.
Moves the cursor right one position.
Moves the cursor to the beginning of the line.
Deletes one character.
Deletes the previous word.
Stops output to the console terminal for the current command.
Toggles between enable and disable. The output can be re-enabled
by other means as well: when the console prompts for a command,
issues an error message, or enters program mode, or when Ctrl/P is
entered.