Table 6-1 Status Command Fields - HP AlphaServer TS15 Owner's Manual

Table 6–1 Status Command Fields
Field
RMC Runtime
Firmware Revision
RMC Booter Firmware
Revision
System Power
System Halt
Escape Sequence
Remote Access
Modem RMC Defaults
Modem RMC Status
RMC Password
Alerts
Warning Alerts
6-16 hp AlphaServer TS15 Owner's Guide
Meaning
RMC runtime firmware revision
RMC booter firmware revision
State of system power:
ON = System is on. OFF = System is off.
System halt state:
Asserted = Halt is asserted
Deasserted = Halt is not asserted
Current escape sequence used to access the RMC
Remote access state:
Enabled = System is enabled for remote access via modem.
Disabled = System is not enabled for remote access
via modem.
Older AlphaServer / AlphaStation modem-initialization
sequence:
Enabled = System is configured to append additional
fixed commands to the user-supplied modem
initialization string
Disabled = System will not append additional fixed
commands to the user-supplied modem initialization string
Message indicating the current COM1 modem status. Messages
include 'Initialized', 'Not Initialized', 'Not Present', and
various modem initialization error messages.
Modem access password state
Set = Password set for modem access.
Not Set = Password not set for modem access.
Dial-out alert status:
Enabled = Dial-out for sending alerts is enabled.
Disabled = Dial-out for sending alerts is disabled.
Warning alert status:
Enabled = System warnings will generate alerts.
Disabled = System warnings will not generate alerts.