Displaying The Bootable Devices; Table 2-1 How Physical I/O Slots Map To Logical Slots - HP AlphaServer TS15 Owner's Manual

Hose 0, Bus 1
The Acer is configured to use a floppy, but the device is not present.
Hose 2, Bus 0, PCI
Slots 7 and 8 are 66MHz/33MHz and slots 9 and 10 are 33 MHz.
Slot 7 is an ATI Radeon 7500 Graphics Accelerator running at 66 MHz.
Jumpers. State of jumper settings
Table 2–1 How Physical I/O Slots Map to Logical Slots
Physical Slot SRM Logical Slot ID
1 Hose 2 Slot ID 7
2 Hose 2 Slot ID 8
3 Hose 2 Slot ID 9
4 Hose 2 Slot ID 10
2.4.3

Displaying the Bootable Devices

Use the show device command to display the devices from which the operating system
can be booted.
Example 2–6 Show Device
>>>show device
dka0.0.0.8.0
dka100.1.0.8.0
dqa0.0.0.13.0
dva0.0.0.1000.0
eia0.0.0.9.0
eib0.0.0.10.0
pka0.7.0.8.0
pkb0.7.0.108.0
>>>
The third device in the printout,
table.
DKA0
DKA100
DQA0
DVA0
EIA0
EIB0
PKA0
PKB0
, is used as an example in the following
dqa0.0.0.13.0
COMPAQ BF03665A32
COMPAQ BF03665A32
DW-224E
00-02-A5-20-C0-39
00-02-A5-20-C0-3A
SCSI Bus ID 7
SCSI Bus ID 7
Operating the System
3B01
3B01
A.1J
2-13